Blogs

Nutaq will be at IEEE Globecom 2015 – San Diego, CA

Nutaq will be exhibiting at next Globecom 2015 that will take place in San Diego, California from December 6 to 10. We will be at booth #216. We'll be participating in the lightning talks, present our first demonstration of our new calibration reference design, show the all-integrated LTE solution in action and share our latest LTE performance measurements [...]

Nutaq will be at IEEE Globecom 2015 – San Diego, CA 2015-12-03T21:23:54+00:00

NEW VIDEO: PRESENTATION OF NUTAQ AT IEEE ICC 2015, LONDON, JUNE 8-12

You missed our presentation at last IEEE ICC in London about Reducing the Cost and Complexity of Massive MIMO Systems Through Quasi-Massive Effect? You can get the video right here! _____________________________________________________________________________________Nutaq will be attending the next IEEE ICC Event from June 8 to 12 in London. Come visit us at booth #40 to get more info [...]

NEW VIDEO: PRESENTATION OF NUTAQ AT IEEE ICC 2015, LONDON, JUNE 8-12 2015-07-31T11:57:36+00:00

New Whitepaper – A 100×100 Massive MIMO Testbed Based on xTCA Standards

A unique 100x100 Massive MIMO testbed based on telecom standards has been developed which solves the previous wideband over-the-air RF-to-baseband processing channel aggregation bottleneck present in shared, fixed backplane or network testbed architectures, while presenting a scalable RF and baseband processing strategy towards 5G. Massive MIMO researchers can now design, simulate, and test algorithm performance under real-world conditions, targeting the entire suite of [...]

New Whitepaper – A 100×100 Massive MIMO Testbed Based on xTCA Standards 2015-07-31T11:54:40+00:00

Nutaq Innovation expands relationship with a $265,000 contract to supply MicroDigitizer to MAX IV Laboratory in Sweden

Highlights Model-based design leads to easy portability of algorithms developed on a previous generation Low Level RF (LLRF) system Increased safety through ultra-low latency power amplifier shutdown in case of failure detection 40% system cost reduction realized through hardware optimization Quebec, QC, Canada, NOV 13, 2014 — Nutaq Innovation Inc. is proud to announce that it [...]

Nutaq Innovation expands relationship with a $265,000 contract to supply MicroDigitizer to MAX IV Laboratory in Sweden 2015-08-12T13:41:20+00:00

QEOS and NUTAQ partner to deliver industry’s first complete baseband processing with V-Band millimeter wave radio for 5G Massive MIMO Applications

Leaders millimeter-wave CMOS and SDRs systems collaborate to enable cutting-edge 5G massive MIMO platforms.    Milpitas, CA and Quebec City, QC, April 9, 2015 - QEOS, Inc., a leading provider of connectivity and sensing CMOS millimeter-wave solutions and Nutaq, a leader in fast-prototyping platforms for operators and telecom vendors, today announced that they are collaborating to [...]

QEOS and NUTAQ partner to deliver industry’s first complete baseband processing with V-Band millimeter wave radio for 5G Massive MIMO Applications 2015-07-31T11:58:08+00:00

New Paper – Two-Layer Linear Processing for Massive MIMO on the TitanMIMO Platform

 Sebastien Roy at Université de Sherbrooke examines Massive MIMO advanced approach which minimize system cost and complexity while maintaining performance required for 5G ultimate deployment scenarios.Some of the presented findings include:Use of MMSE and ZF on a two-layer processing scheme to reduce Massive MIMO system costPerformance comparisons of such approachPrototyping on a real-time Massive MIMO [...]

New Paper – Two-Layer Linear Processing for Massive MIMO on the TitanMIMO Platform 2015-07-31T11:54:58+00:00

Design and Implementation of Wideband Spectrum Sensing on SDR Platform With Receiver Calibration

Researchers at the Institut National de la Recherche Scientifique examine detection algorithms and their implementations for wideband cognitive radio networks using Nutaq's PicoSDR platform. Some of the presented findings include: Comparison of algorithm performance with and without performing calibration of the Nutaq PicoSDR platform. Evaluation of the robustness of the considered detection algorithms against noise [...]

Design and Implementation of Wideband Spectrum Sensing on SDR Platform With Receiver Calibration 2017-12-13T16:07:32+00:00

Nutaq Presenting at International Wireless Symposium in China, 31 March 2015

 At this year’s IWS, Nutaq’s Tristan Martin will be taking part in The 5G Cellular Workshop chaired by Professor Corbett Rowell.The half-day workshop on Tuesday 31 March will offer a high level perspective of 5G’s system and architecture issues together with discussions about the practical implementation of 5G technologies with prototype development, practical challenges, and [...]

Nutaq Presenting at International Wireless Symposium in China, 31 March 2015 2015-07-31T11:58:26+00:00

Major Boost For 5G Research As The 5G Development Center Opens

QUEBEC CITY, CANADA -- 01/20/15 -- The countdown to 5G has officially begun following today’s opening of The 5G Development Centre at Nazarbayev University in Kazakhstan. To achieve 5G’s anticipated speeds of up to 800Gbps and thousand-fold increase in capacity requires the development of a multitude of new components and techniques to improve spectral efficiency, accommodate [...]

Major Boost For 5G Research As The 5G Development Center Opens 2015-07-31T11:58:43+00:00

The German Aerospace Center (DLR) Selects Nutaq’s Digitizer Solutions For Satellite Navigation Receivers

Nutaq's PicoDigitizer-125 Series"I haven’t seen another device which has such a powerful FPGA, so many high speed ADC channels and also a CPU card integrated in such a small chassis.” Manuel Cuntz - DLRDLR is Germany’s national research centre for aeronautics and space. Its extensive research and development work in aeronautics, space, transportation and energy is [...]

The German Aerospace Center (DLR) Selects Nutaq’s Digitizer Solutions For Satellite Navigation Receivers 2015-07-31T11:59:17+00:00